2 - Logo Sarot Filtration

SAROT +filtration+softener+deionizer ihtiyaç duyduğunuz su kalitesine ulaşmanızı sağlar.

Water Softening Systems

The process of water softening is carried out through ion exchange. Water containing calcium and magnesium ions (Ca2+ and Mg2+), which cause hardness, is passed through a cationic resin in the form of sodium. As the hard water passes through the sodium-based cationic resin, the hardness ions in it are exchanged with the Na+ ions bound to the resin, resulting in softening of the water.

Softening/Lime Removal

Water softening systems can be designed in three different ways:

TIME CONTROLLED:
Time-controlled water softening systems perform the regeneration process on a scheduled basis, on the desired day of the week and at the desired time, without any intervention. When the resin reaches saturation, it enters regeneration with saltwater in a time-controlled manner, removing calcium and magnesium ions from the system.

FLOW CONTROLLED:
Flow-controlled water softening systems measure the amount of water passing through the device using a meter on the device and perform the pre-programmed regeneration process. When the resin reaches saturation, it enters regeneration with saltwater in a flow-controlled manner, removing calcium and magnesium ions from the system.

TANDEM:
Tandem water softening systems consist of two softening units. The system can be controlled either by flow rate, planned time, or both. In the tandem system, each softening unit enters regeneration one after the other and, once ready, waits for the other unit in the treatment to become saturated and transfer the treatment to itself. This ensures uninterrupted soft water production 24 hours a day without waiting for regeneration processes.

GET A PRICE QUOTE FOR YOUR WATER AND WASTEWATER TREATMENT SYSTEM NEEDS

System Features

Commercial Systems

Factories, Hotels, Schools, Hospitals, Dormitories, etc., with an hourly water consumption of less than 5m³, are designed as low-cost systems.

  • İçi polietilen, dışı cam elyaf bobin sargılı test basıncı 10 bar işletme basıncı 6 bar filtre tankları
  • Pistonlu yerine küresel vanalı valflerle düşük bakım maliyetleri
  • Alt dağıtım yapısında ayna üzeri mantar difüzörler
  • Doldurma ve boşaltma menholleri
  • Geri yıkamada temiz su ile geri yıkama
  • Geri yıkamada ham su ile geri yıkama
  • Otomatik programlanabilir geri yıkama
  • Günün istenilen saatine geri yıkama*
  • Geri yıkama esnasında no-bypass (hatta giden suyu kesen)
  • Geri yıkama esnasında yes-bypass (hatta giden suyu kesmeyen)
  • Fark basıncına göre geri yıkama
  • Blower ile havalandırma
  • Dokunmatik ekranlı ve uzaktan kontrollü otomasyon
  • SCADA’ya aktarılabilir uzaktan izlenilebilir ve tesise müdahale edilebilir.

Industrial Systems

Systems designed for Factories, Social Facilities, Rural Settlement Areas, Neighborhoods, Towns, etc., with an hourly water consumption between 5 – 20 m³

  • İçi polietilen, dışı cam elyaf bobin sargılı test basıncı 10 bar işletme basıncı 6 bar filtre tankları
  • Pistonlu yerine küresel vanalı valflerle düşük bakım maliyetleri
  • Alt dağıtım yapısında ayna üzeri mantar difüzörler
  • Doldurma ve boşaltma menholleri
  • Geri yıkamada temiz su ile geri yıkama
  • Geri yıkamada ham su ile geri yıkama
  • Otomatik programlanabilir geri yıkama
  • Günün istenilen saatine geri yıkama*
  • Geri yıkama esnasında no-bypass (hatta giden suyu kesen)
  • Geri yıkama esnasında yes-bypass (hatta giden suyu kesmeyen)
  • Fark basıncına göre geri yıkama
  • Blower ile havalandırma
  • Dokunmatik ekranlı ve uzaktan kontrollü otomasyon
  • SCADA’ya aktarılabilir uzaktan izlenilebilir ve tesise müdahale edilebilir.

Mass Systems

Systems specially designed for factories with an hourly water consumption of 20 m³ and above, as well as city/town municipalities’ urban network waters, etc.

  • İçi polietilen, dışı cam elyaf bobin sargılı test basıncı 10 bar işletme basıncı 6 bar filtre tankları
  • Pistonlu yerine küresel vanalı valflerle düşük bakım maliyetleri
  • Alt dağıtım yapısında ayna üzeri mantar difüzörler
  • Doldurma ve boşaltma menholleri
  • Geri yıkamada temiz su ile geri yıkama
  • Geri yıkamada ham su ile geri yıkama
  • Otomatik programlanabilir geri yıkama
  • Günün istenilen saatine geri yıkama*
  • Geri yıkama esnasında no-bypass (hatta giden suyu kesen)
  • Geri yıkama esnasında yes-bypass (hatta giden suyu kesmeyen)
  • Fark basıncına göre geri yıkama
  • Blower ile havalandırma
  • Dokunmatik ekranlı ve uzaktan kontrollü otomasyon
  • SCADA’ya aktarılabilir uzaktan izlenilebilir ve tesise müdahale edilebilir.
Valve Filter Systems
Product Code Tank Flow Rate 30m/h Flow Rate 40m/h m³/fr Resin (lt) Quartz (kg)
SR-RUN-YF-817 8×17 1 1,3 80 8
SR-RUN-YF-835 8×35 1 1,3 200 20
SR-RUN-YF-1035 10×35 1,5 2 300 30
SR-RUN-YF-1054 10×54 1,5 2 500 50
SR-RUN-YF-1252 12×54 2,2 2,9 600 60
SR-RUN-YF-1354 13×54 2,6 3,4 750 75 10
SR-RUN-YF-1465 14×65 3 4 1000 100 10
SR-RUN-YF-1665 16×65 3,9 5,2 1500 150 15
SR-RUN-YF-1865 18×65 5 6 2000 200 20
SR-RUN-YF-2162 21×62 6 7,7 2500 250 25
SR-RUN-YF-2472 24×72 8,8 11,6 3000 300 30
Valve Filter Systems
Product Code Tank Flow Rate 30m/h Flow Rate 40m/h m³/fr Resin (lt) Quartz (kg)
SR-RUN-YF-1865 18×65 5 6 2000 200 20
SR-RUN-YF-2162 21×62 6 7,7 2500 250 25
SR-RUN-YF-2472 24×72 8,8 11,6 3000 300 30
SR-RUN-YF-3072 30×72 13,7 15 5000 500 50
SR-RUN-YF-3672 36×72 20 26 7500 750 75
SR-RUN-YF-4272 42×72 26 30 9000 900 100
SR-RUN-YF-4872 48×72 30 30 12000 1200 125
Surface Piping Filter Systems
Product Code Tank Connection Flow Rate 40m/h m³/fr Resin (lt) Quartz (kg)
SR-Y-YF-3072 30×72 50-50 18 5000 500 125
SR-Y-YF-3672 36×72 50-50 26 7500 750 200
SR-Y-YF-4294 42×94 65-65 28 9000 900 225
SR-Y-YF-4894 48×94 65-65 46 12000 1200 350
SR-Y-YF-6394 63×94 80-80 55 14000 1400 750
SR-Y-YÇ-48100 48×100 65-65 46 18000 1800 300
SR-Y-YÇ-63118 63×118 80-80 80 28000 2800 400
SR-Y-YÇ-78128 78×128 100-100 125 44000 4400 500
SR-Y-YÇ-94134 94×134 125-125 180 63000 6300 700
Whatsapp'tan yazın