SAROT +filtration+softener+deionizer it allows you to achieve the water quality you need.
Filtration Systems
Filtration systems and advanced treatment technologies are used to remove dissolved and undissolved particles of various sizes, suspended solids, heavy metals, turbidity, and salinity from water.
Activated Carbon Filtration Systems
Activated carbon filtration systems are used for the treatment of unwanted chlorine, color, taste, odor-producing dissolved gases, and organic matter in water.
Automatic filters, with the absorption property of activated carbon, draw water molecules and ions towards their inner surfaces through mineral pores, resulting in water that is free from organic matter, colorless, odorless, and clear. Over time, the pores of activated carbon can become clogged, which means the carbon’s holding pores cannot provide further purification. Therefore, backwashing is used to clean the pores. Filtration systems are automatic and self-backwash.
SAKA ARITIM engineers design SAROT+filtration carbon filtration systems by conducting the necessary water tests. After pre-filtration processes are completed, the systems are designed with a minimum contact time of 3 minutes and a 50% expansion factor. They use valves with spherical heads instead of piston valves, which eliminates the need for high maintenance costs and O-ring replacements. Thanks to programmable automatic backwash valves, the system can perform backwashing at the desired time of the day, at least once every 12 hours.
GET A PRICE QUOTE FOR YOUR WATER AND WASTEWATER TREATMENT SYSTEM NEEDS
System Features
Commercial Systems
These systems are designed for facilities such as factories, hotels, schools, hospitals, dormitories, etc., with an hourly water consumption of less than 5m³ and are designed to be cost-effective.
- Filter tanks with an interior of polyethylene, an exterior of fiberglass-wound coil, test pressure 10 bar, operating pressure 6 bar
- Valves with spherical valves
- Backwashing with clean water*
- Backwashing with raw water
- Programmable automatic backwash
- Backwash at a desired time of the day*
- No-bypass during backwash (shutting off the water in the line)
- Yes-bypass during backwash (not shutting off the water in the line)*
- Backwash based on differential pressure*
- Aeration with a blower*
Industrial Systems
These systems are designed for facilities such as factories, social facilities, rural settlements, neighborhoods, towns, etc., with an hourly water consumption ranging from 5 to 20 m³.
- Filter tanks with polyethylene interior and fiberglass wound coil exterior, test pressure 10 bar, operating pressure 6 bar
- Spherical valves
- Octopus diffusers in the lower distribution structure
- Backwashing with clean water
- Backwashing with raw water
- Programmable automatic backwashing
- Backwashing at a desired time of the day
- No-bypass during backwash (cutting off water in the line)
- Yes-bypass during backwash (not cutting off water in the line)
- Backwashing based on differential pressure
- Aeration with blower
Mass Systems
These systems are specially designed for facilities such as factories, city municipalities, and district municipalities with an hourly water consumption of 20 m³ and above, as well as for city mains water usage.
- ST37 carbon steel filter tanks with internal/external epoxy coating, operating pressure 10 bar, design pressure 6 bar
- Low maintenance costs with valves equipped with spherical valves instead of piston valves
- Mushroom diffusers on top of the mirror in the lower distribution structure
- Filling and emptying manholes
- Backwashing with clean water
- Backwashing with raw water
- Programmable automatic backwash
- Backwash at a desired time of the day*
- No-bypass during backwash (cutting off the water in the line)
- Yes-bypass during backwash (not cutting off the water in the line)
- Backwash based on differential pressure
- Aeration with a blower
- Automation with touch screen and remote control
- Can be remotely monitored and intervened in the facility, data transferable to SCADA
Features marked with (*) are added to the system design according to the need or request.
| VALVE FILTER SYSTEMS | |||||
| Product Code | Tank | Flow Rate 15m/h | Flow Rate 20m/h | Anthracite (lt) | Quartz (kg) |
| SRV-KF-817 | 8×17 | 0,5 | 0,65 | 2 | 6 |
| SRV-KF-835 | 8×35 | 0,5 | 0,65 | 7 | 14 |
| SRV-KF-1035 | 10×35 | 0,75 | 1 | 10 | 23 |
| SRV-KF-1054 | 10×54 | 0,75 | 1 | 15 | 38 |
| SRV-KF-1252 | 12×52 | 1 | 1,5 | 20 | 40 |
| SRV-KF-1354 | 13×54 | 1,3 | 1,7 | 25 | 50 |
| SRV-KF-1465 | 14×65 | 1,5 | 2 | 35 | 70 |
| SRV-KF-1665 | 16×65 | 2 | 2,6 | 50 | 100 |
| SRV-KF-1865 | 18×65 | 2,5 | 3,3 | 75 | 115 |
| SRV-KF-2162 | 21×62 | 3,3 | 4,5 | 85 | 175 |
| SRV-KF-2472 | 24×72 | 4,4 | 5,8 | 100 | 225 |
| Valve Filter Systems | |||||
| Product Code | Tank | Flow Rate 15m/h | Flow Rate 20m/h | Anthracite (lt) | Quartz (kg) |
| SRV-KF-1865 | 18×65 | 2,5 | 3,3 | 75 | 115 |
| SRV-KF-2162 | 21×62 | 3,3 | 4,5 | 85 | 175 |
| SRV-KF-2472 | 24×72 | 4,4 | 5,8 | 100 | 225 |
| SRV-KF-3072 | 30×72 | 6,8 | 9 | 125 | 475 |
| SRV-KF-3672 | 36×72 | 10 | 13 | 175 | 650 |
| SRV-KF-4272 | 42×72 | 13,4 | 18 | 200 | 775 |
| Surface Piping Filter Systems | |||||
| Product Code | Tank | Flow Rate 20m/h | Flow Rate30m/h | Antrasit (lt) | Quartz (kg) |
| SRY-KF-3072 | 30×72 | 9 | 14 | 125 | 475 |
| SRY-KF-3672 | 36×72 | 13 | 24 | 175 | 650 |
| SRY-KF-4294 | 42×94 | 18 | 27 | 200 | 775 |
| SRY-KF-4894 | 48×94 | 23 | 35 | 300 | 1125 |
| SRY-KF-6394 | 63×94 | 40 | 60 | 550 | 2025 |
| SRY-KÇ-48100 | 48×100 | 25 | 37 | 350 | 1375 |
| SRY-KÇ-63118 | 63×118 | 40 | 60 | 600 | 2375 |
| SRY-KÇ-78128 | 78×128 | 63 | 94 | 800 | 3150 |
| SRY-KÇ-94134 | 94×134 | 91 | 136 | 1150 | 4525 |